|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
67.183.101.8
In Reply to: RE: Lithium grease... posted by R Browne on June 08, 2016 at 21:07:10
n/t
Follow Ups:
I'd still be wary of lithium grease. It may work for awhile, but may eventually dry up and create problems later. I'd favor a very light oil that will allow the laser assembly to run smoothly with a minimum of error correction. First clean any residue on the rails with a solvent or alcohol then lightly apply the lubricant with a Q-Tip. After applying the lubricant it helps to put in a disk with 75-80 mins. of music on it and track it from beginning to end a few times to distribute the lubricant the length of the rails.
Agreed. That makes the most sense. Good job!
Jonesy
"I know just enough to get into trouble. But not enough to get out of it."
n/t
nt
nt
"I know just enough to get into trouble. But not enough to get out of it."
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: