|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
67.183.101.8
In Reply to: RE: I did leave out some info.... posted by Awe-d-o-file on May 27, 2016 at 18:49:43
Made the squeal so it must the sound of the mechanism going back to rest. So, what do I lube? :) Pics would be very helpful as I am not a diy kind of guy plus the peripheral neuropathy in fingers is getting worse so kinda tough to do any kind of "fine" work....
Follow Ups:
If you open and look at the laser there are two metal rails on which it moves back and forth that might be the noise source. If they are you could put some appropriate lube on a Q tip. Obviously do some testing with the cover off and try and pin point the source of the noise. Was the duration of the noise shorter when you stopped the disc after track one than the duration when the whole disc was played?
ET
yes, the duration was shorter...
That lends itself to the laser returning to the rest position. Get in there and relube it. I know you can do it.
ET
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: