|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
103.3.233.57
In Reply to: RE: Again, do you have the Amanero card or the earlier USB32 interface? posted by Ivan303 on December 15, 2015 at 13:26:45
I have the amanero. If you look at the wiring, the amanero's I2S output goes into the master11 board right next to the one from the RJ45, both into the same kind of chip. So what you effectively have with the amanero is just what you mention - USB-I2S box, but mounted inside the M11. Can't see any real advantage of putting it outside the box.
Very impressive sound from the USB without even trying to optimize it (yet).
Hmm, looking at the amanero schematic, it looks like it's powered from the USB port. I would have guessed otherwise. But there may be jumpers on the board that let you power from external source (ie the M11). I'll have to have a closer look at the board itself. It it is powered from the USB port then there's a potential upgrade. (powering it from another psu)
Follow Ups:
Not our King Wa!
This is a board built for King Wa but licenses from AMANERO. Note the difference between the Audio-GD version pictured above and the one on the Amanero Web site linked below.
From the Audio-GD web site:
"In Audio-gd products, the Amanero Combo 384 have not power supply from computer for the less disturb."
That's why I was surprised. Good to know.
Also the Audio-gd version has much better capacitors on the board. And different resistors.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: