|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
74.130.29.193
In Reply to: RE: USB to spdif that downsamples posted by Thorsten on November 03, 2015 at 17:49:18
> But the impedance mismatch for BNC vs. RCA is trivial next to the AES connection on XLR.
> So with XLR for digital you really create huge problems.
I don't think so! The best sounding digital in my system comes from my Toshiba notebook computer with Windows 7 and Foobar2000 streaming to an April Music Stello U3 Link that outputs via AES/EBU to my TASCAM DA-3000 DSD recorder configured to operate as a PCM DAC. I just discovered I could use the TASCAM DA-3000 as a DAC and it sounds absolutely superb via AES/EBU. The Stello U3 Link converts PCM digital up to 24/192 and it also reclocks the data stream. I have never heard digital sound better except for DSD from a USB flash drive connected directly into the USB "A" port on the TASCAM DA-3000. Therefore, I think AES/EBU is an excellent digital interface -- the best I've ever heard.
To each his own!
Follow Ups:
Hi,
We have two issues here.
Objectively AES XLR connections with common SPDIF/AES3 receivers will usually produce more jitter than than the now also AES Recommend coaxial (as AES3id) connection.
Subjectively you prefer the AES XLR Input to Coaxial (I presume you tried both).
It would be interesting to run a J-test on either connection to see which performs better objectively. You don't happen to have an AP2 around?
If both SPDIF and AES on XLR are done to the same standards AES on XLR is worse, but no-one said they would be implemented this way.
Given what we know about the SF DAC's though, for this I would pick Coax over XLR myself. It uses the same Ultranlogue receiver module as the Audio Synthesis DAX. I found that better with Coax.
Ciao T
At 20 bits, you are on the verge of dynamic range covering fly-farts-at-20-feet to untolerable pain. Really, what more could we need?
Hi Thorsten,
It is the same old problem that we keep running up against trying to compare technologies. In most cases, it is impossible to isolate the technology and duplicate everything else. Basically, all most of us can do is try it in our system and make the best guess as to why it sounds good or not. It could be the technology. It could be the execution. I could be our preference to a certain type of distortion.
Dave
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: