|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
203.218.232.35
In Reply to: RE: Rubidium clock not locking posted by AbeCollins on January 07, 2015 at 12:18:39
Hi, Abe!
I also have a feeling that the frequency reference itself is not locking, as I remembered that its lock indicator light would either dim or turn off when it's stable, but now it just stays lit. Someone on another forum say that this thing requires a slightly higher current starting up. I checked the output of the power supply, and it is outputting 14.8v and 0.62A, which seems to be about the constant power requirement of the module, and nowhere near its max requirement, which is about 2A, I think. Anyway,I'll likely take it to a repair shop to check it out.
Thanks.
Follow Ups:
I also have a feeling that the frequency reference itself is not locking,...Yes, that was my first point. You have to determine if the Rb clock is locking otherwise the 10MHz output signal is likely to wander (deliberately) as it tries to lock.
The OCXO oven should draw significantly more current at initial power ON while it's cool and then the current tapers off to a lower steady state level. If this is not happening, there's a chance that the oven heater is out. Let the Rb clock rest for a period of time so it is completely cool, then power it up and measure the current draw over time.
You really need a frequency counter and oscilloscope to trouble shoot. We had Tracor frequency difference meters to compare the output of a Rb clock against known reference.
You could poke around with a DMM to see if you have heater voltage. There are many other things to check including the Rb lamp. If you open the unit up, you should be able to see the light from Rb lamp but it might be buried within the physics module. If the lamp doesn't light a couple things could be wrong. There's no heat to create vapor from the Rubidium metal within the lamp. RF is used to excite an inert gas within the bulb creating a plasma to help heat the Rubidium. The RF might be out.
Most 'repair shops' have never seen an Rb oscillator so hopefully you'll find a very sharp tech.
Edits: 01/07/15
I sure hope that it is fixable on the cheap. Although I understand the skepticism on this type of device, I do hear a better sound using it. Who knows, maybe it's still placebo after all, but, like in medicine, if placebo makes the sick feels better, why not? :)
Found a guy who DIY's clock devices and audio equipment for sale. Hope he can deal with it.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: