|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
98.217.204.116
In Reply to: RE: "mains related side-bands which are NOT jitter" posted by Thorsten on January 02, 2015 at 19:57:55
. . . . .
Power supply related noise can disturb clock.
If the disturbance has some periodicity, there will be sidebands.
Follow Ups:
....how many DAC's have you measured, for example for jitter? One does not need an AP2, ULP or dScope for that either (though something better than a 3rd octave RTA is needed in most cases)?
What you dig out is old news to me. And I will repeat, from experience the most likely cause of the results measured is not actual jitter, not PSU noise disturbing the clock or any of this, it is a simple and old fashioned operator error by the person setting up the measurement.
And I got that experience by making similar mistakes on occasion and learning to avoid repeating them subsequently.
I understand that you do not like my conclusions and that you want desperately believe that the particular test is not in error (even though alternative tests that fail to show the same problem exist in the public domain.
But honestly, that is your problem, not mine.
Ciao T
At 20 bits, you are on the verge of dynamic range covering fly-farts-at-20-feet to untolerable pain. Really, what more could we need?
I think your claim is completely wrong.
If the measurement set up invites so much 60Hz, 120Hz, 180Hz, 240Hz, . . . . . noise so that it can cause such a high jitter from a non-defective well-designed hi-fi DAC,
it is impossible to have this graph: THD at 0 dBFS (2.2V RMS), 22kHz measurement bandwidth.
Hi,
> If the measurement set up invites so much 60Hz, 120Hz, 180Hz, 240Hz, . > . . . . noise so that it can cause such a high jitter from a
> non-defective well-designed hi-fi DAC,
>
> it is impossible to have this graph: THD at 0 dBFS (2.2V RMS),
> 22kHz measurement bandwidth.
Please, based on your understanding of the R&S ULP analyser and the specific way the above measurement (note it is THD NOT THD & N) is operated, provide an adequate explanation as to why mains related hum would show up in the test you reference.
Ciao T
At 20 bits, you are on the verge of dynamic range covering fly-farts-at-20-feet to untolerable pain. Really, what more could we need?
If there is high level 60Hz signal, how can it have low THD at 20Hz?
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: