|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
98.19.155.139
In Reply to: RE: Well, yes... posted by DAVID on November 23, 2014 at 13:42:30
I know very little about DACs, but I have never heard of a down-sampling DAC. I think all NOS DACs convert the signal to analog directly from the sampling rate they receive.
If you are really concerned, there is a very simple way to find out. All you need is a digital recorder that records at the sampling rate you are concerned about. Using a square wave generator, record a 1-kHz square wave. Play the digital square wave through your NOS DAC and look at the output on an oscilloscope. Count the ripples on the top of the square wave and that will tell you whether the square wave was down-sampled before it was converted to analog. Here is what a 1-kHz square wave looks like from a 16/44 digital recording.
The same 1-kHz square wave recorded at 24/96 will have twice as many ripples. I made this test on my Alesis Masterlink to determine whether it was actually doing an A/D/A conversion in its record monitor mode. I discovered it was doing the A/D/A conversion and I also discovered it was doing it at the sampling rate at which it was set.
Good luck,
John Elison
Follow Ups:
...I think I might have a little trouble getting ahold of a signal generator and o-scope. Might be fun though.
Any audio editor will generate a digital "square wave". Some are free, others have free trial downloads. This will take care of the "digital signal generator" portion.
You can also use a sound card to capture an analog signal, e.g. the output of a DAC. You can then use an audio editor to plot the resulting waveform.
Tony Lauck
"Diversity is the law of nature; no two entities in this universe are uniform." - P.R. Sarkar
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: