|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
73.239.106.81
In Reply to: RE: Transport to dac via digital coax cable posted by Jonesy on December 10, 2016 at 13:00:00
Hi Jonesy,
Have you tried the newer VH Audio Pulsar Cu II OCC coaxial cable? I think you might find it offers a more dynamic sonic signature than the original Pulsar cable. It also provides a warmer and more full-bodied sonic signature, while still sounding coherent and detailed.
Cheers, Duster
Follow Ups:
Hi Duster,
That's good to know. Might have to give it a try.
Thanks for this.
Cheers!
Jonesy
"I know just enough to get into trouble. But not enough to get out of it."
BTW, what rca connector did you use at the one end of your DIY Pulsar build?
The RCA connector was from the original QED cable pair. Has a hollow barrel all the way through so you can feed a wire in very deep. The outer ring is actually quite thick and easily tightened for a good grip. DH Labs had some 75 ohm RCA connectors available but I really didn't understand how that was possible. So essentially used the QED's because I had them.
Cheers!
Jonesy
"I know just enough to get into trouble. But not enough to get out of it."
If you order a 0.5 meter length of Pulsar Cu II OCC cable from VH Audio, I'm sure you could also order a single BNC connector and single rca connector along with it. Not all sellers are as accommodating as ChrisVH...
If possible, ordering singles would work out nicely. Thanks for the suggestion!
Jonesy
"I know just enough to get into trouble. But not enough to get out of it."
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: