|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
99.102.141.33
In Reply to: RE: The concern is overstated, posted by mitch2 on December 15, 2015 at 04:32:29
You mean like the one in the link?
I'm having trouble picturing the mechanics of how this exactly works, and what connectors would fit in that slot etc.. please more detail on specific wire and connectors etc..
Any Youtube videos of someone doing this sort of thing?
Thanks.
Follow Ups:
Exactly that one. It comes with a bunch of different sized dies that you can size to your work. Insert a spade with wire inside and then the hydraulic pressure can be used to squeeze the living s__t out of the wire/connector. You basically end up with the spade and wire virtually fused together. I have never had a connection come apart. You could probably also use it on crimp sleeves. However,, I don't use it on ICs, which I solder.
For a more conventional approach, buy a racheting crimp tool.
If you crimp the s**t out of it the terminal will fall off. You overcome the mechanical strength of the material/wire. Then no electrons will flow. There are RCA connectors that you can crimp with specialized tooling that crimps very well, problem is that not everyone likes using co-axial cable for interconnects. http://www.rpelectronics.com/ct-419-compression-crimp-tool-bnc-f-rca-connectors-rg58-59-6.html
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: