|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
207.62.246.184
In Reply to: RE: 1/2" X close rigid aluminum nipple posted by jea48 on December 17, 2014 at 14:42:47
Jim, will the Bell aluminum boxes sound better that plastic boxes in your experiance if you ever abed the things. I could just string another cheap plastic box and hide the rig but if these boxes sound much better I'd go with them. I'd also go with brass screws. Thanks, Tweaker
Follow Ups:
Sorry, I can't help you there. Duster may have some experience using a plastic box.
Jim
> >
> > >
IMO, a plastic box may be an expedient way to build a low-budget DIY power distributor, but an AC outlet mounted on a plastic box doesn't make sense from an audiophile POV since it won't provide the kind of rigid high-mass resonance damping and electrical shielding that an aluminum box can provide. The benefit of a rigid thick-walled aluminum box is directly associated with damping detrimental resonance produced at the AC socket contacts/AC plug blades interface when firmly affixed to the aluminum box via the backstrap of the AC outlet, especially the two ground prongs of a duplex outlet directly fastened to the backstrap. The rigid high-mass brass backstrap of an Audio Grade AC outlet like that of an Oyaide R1 is of great benefit to the sound, especially when mounted on an Oyaide WPC-Z aluminum wall bracket. Many users report that the Oyaide WPC-Z improves the sound as much as an Oyaide AC outlet does. YMMV
Thanks Duster, I'll likely go with the inexpensive Bell aluminum boxes instead of plastic. Tweaker
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: