• Re: Straight 8 parts 'n plans kit - more details Doc B. 09:38:24 01/14/00 (0)
  In Reply to: Straight 8 parts 'n plans kit posted by Doc B. on January 12, 2000 at 16:44:50:

  Answers to questions-

  We sell direct, you order the kit from us. You can order by e-mail, or by phone 360-697-1936 M-F 9-5 PT (Monday thru Thursday is best). We take VISA/MC/AMEX/DISC. Don't have a handle on the shipping cost yet.

  I don't have a picture up yet, either. We're in the process of revamping the website and hopefully we'll have some pics up very soon.

  Actual dimensions are 11.5W x 12D x 49H. The drivers are in a linear array with the tweeter at the top, spacing is about 1/4" between each pair of drivers. There are two side by side 3" ports on the back about 8" up from the bottom, and two pairs of Big Studs, for biamping. Crossover is first order, around approx. 4 kHz. Sensitivity is 96 dB, response is about 40Hz to 22kHz in a typical room, and quite flat. Nominal impedance is 16 ohms, they could be wired for four ohms too.

  We may have finished cabinets and finished speakers for sale in the future, but don't hold your breath, as I don't have clue when that would be. Many other projects ahead of that. If any cabinet makers would like to talk to me about getting a license to do these cabinets, please call me or e-mail me.

  When you are in the Puget Sound area, give us a call. We can arrange an audition.
  
  
  

  ---
• Re: Straight 8 parts 'n plans kit Paul Silverstein 04:31:58 01/14/00 (0)
  In Reply to: Straight 8 parts 'n plans kit posted by Doc B. on January 12, 2000 at 16:44:50:

  Where will kit be available?
  
  

  ---
• size of finished cabinets? ken m 14:49:37 01/13/00 (1)
  In Reply to: Straight 8 parts 'n plans kit posted by Doc B. on January 12, 2000 at 16:44:50:

  
  Can you tell me what the dimensions are of the finished speakers? Is there a picture posted anywhere on this forum. I guess I'll try the search engine.

  TIA,

  -ken m
  
  
  

  ---

  • 49"H x 12"W x 12"D (found in the archives (nt) ken m 18:11:34 01/13/00 (0)
    In Reply to: size of finished cabinets? posted by ken m on January 13, 2000 at 14:49:37:

    
    
    

    ---
• Re: Straight 8 parts 'n plans kit mer 13:26:00 01/13/00 (0)
  In Reply to: Straight 8 parts 'n plans kit posted by Doc B. on January 12, 2000 at 16:44:50:

  hi doc,
  any plans to make the kit availible with pre-cut cabinets included?
  mer
  
  

  ---
• Re: Straight 8 parts 'n plans kit Doc B. 09:15:55 01/13/00 (0)
  In Reply to: Straight 8 parts 'n plans kit posted by Doc B. on January 12, 2000 at 16:44:50:

  I'm gonna hedge on the sheet size. I've compared a B sheet from our color inkjet to an A sheet from the laserjet, and the laser copy is way more readable, even though smaller.

  Let's just say for now that I will deliver the kit with the best quality prints I can put out.
  
  

  ---
• Methinks I hear alotta grins! mikeo 05:39:00 01/13/00 (0)
  In Reply to: Straight 8 parts 'n plans kit posted by Doc B. on January 12, 2000 at 16:44:50:

  There's gonna be alotta happy folks, now that you've gotten this squared away Doc. BTW, I see you mention felt in the kit, would (could)you divulge your source for it? Some of us may find this useful in other projects.
  
  

  ---

This post is made possible by the generous support of people like you and our sponsors:

Parts Connexion

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2025, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---