Welcome! Need support, you got it. Or share you ideas and experiences.
212.23.103.89
In Reply to: RE: Anyone tried felt around the baskets posted by doughter on February 11, 2008 at 03:57:34
Hi,
i recommend one self adhesive felt- pad, diameter 18mm - 22mm on the inside of each arm of the basket to eliminate disturbing back- waves which are reflected from the inside of the arm on the cone.
Full covering the arms with a layer of felt wrapped around each arm is too much and results overdamped sound.
Regards
Robert Bastani
Follow Ups:
I bought the Magic twins for speakers a long time ago but never used them. How do you wire them into the system?Thx.
Hi,
sorry for my late answer, i didn`t see that there is a new post in this thread!
The Magic Twins filters for speakers are connected to plus and minus of the input- terminals of the open baffles.
Regards,
Robert Bastani
Any one found a vendor for this product recomendation ??
Makes some sense ...
Dogs will be DAWGS...
I ended up buying some felt at a fabric store. I also bought a three foot length of 2.5 inch wide Velcro that has adhesive on one side. Then I cut them in around 5 inch lengths and stuck everything under the basket arms.
I thought about buying the felt with adhesive that is used for under furniture but it seemed to not be as soft as regular felt.
Thanks Robert I'll give it a try.
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: