|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
68.6.139.182
In Reply to: RE: Merrill Audio Taranis first listen (Hypex Ncore) posted by bullethead on February 09, 2016 at 09:10:35
Please see the Smith Chart and the text for electrical measures of the Gallo 3.5 ref.
It is NOT generally bass friendly having a large (50 degrees) reactive peak at low frequencies.
The partnering amp should be pretty capable of driving such loads or it need not apply.
Too much is never enough
Follow Ups:
...use a separate bass amp.
If yes, does the primary amp still drive the woofer load?
Primary amp (Merrill in my case) drives the primary setup. Including the first voicecoil of the woofer configuration which goes down to about 35hz. With second voicecoil driven (separate amp needed for that, crossover set to 40hz, also in my setup) it then goes down to about 22hz.
Edits: 02/10/16
owner just added a pair of these to his set up to add some punch. I think he has a 15 in sub for the deepest bass as well. His initial reaction was joy, but it always starts out the at way.
it always starts out that way, I'll wait a few weeks/months before coming to my conclusions in a review.
aa
"Once this was all Black Plasma and Imagination" -Michael McClure
Absolutely:
Just pointing out that the Gallo is not the 'easiest' load and even the proposed bass-only amp must be capable of dealing with it.
Too much is never enough
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: