|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
50.150.232.230
In Reply to: RE: Morri, Appreciate the effort, Dats some deep S*** , Conceptually WRONG ? posted by morricab on September 18, 2015 at 12:34:57
Morri, yes it's flat to 20K at 2.83V and exhibits some tilt up in the Bass, But you will have to admit the Lamm is special and not at all indicative of what others are using and this is only if you are using it below 2.83V ..
Follow Ups:
The lamm is not "special" it is just done right.
Except for the one you took off your list ... :)
Well, its push/pull, remember?
A couple tenths of a percent doesn't really count now does it?
Look at the 2 watt IMD spectrum for the ML2.1...not bad at all...compare it to a darTZeel and LOL!!
Having heard both at length (i heard the darT in the manufacturers own home and listening room with their fancy preamp...I didn't get the review...guess I couldn't hide my disappointment in the sound well enough) and the Lamm with both on a compatible speaker will trounce the darT sonically.
You are wrong about something else...you can push it and the distortion character isn't going to change...just increase. But as loudness increases the sensitivity to the distortion also decreases...
NO way to comment on that until i can see thd vs freq at more than 2.83V...
http://www.soundstage.com/revequip/lamm_actual.htm
first figure shows 18, 10, 5, 1 and 0.1 W into 8 ohms...not much change.
figure 2 shows same THD vs. power regardless of frequency as well
Now you can comment...
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: