|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
173.33.10.228
In Reply to: RE: 250 mv input for full output posted by RSF on July 26, 2015 at 15:35:43
First you need the voltage at the output.
P=Esqd/R. Assuming an 8 ohm load square root 30/8. This equals 15.5V
Gain is then 20log(Vout/Vin). Looks like aprox. 36db of gain.
Dan Santoni
Follow Ups:
Thanks Dan. The only thing I understood was the 36db. That sounds about right for an integrated. I'm interested in the Icon Audio Stereo 25 MK II and the gain is not listed. Thanks again.
Bob
That's unusually high gain for an integrated or a power amp.
That was my initial reaction but this is an integrated so perhaps 14db for the pre and another 20 db for the amplifier. Sounds about right.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: