|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
206.255.200.146
In Reply to: RE: Why don't you start with posted by tdunn@lanset.com on July 08, 2015 at 09:38:27
So should I run the Mac output to the mixer and the mixer to the Sonamp?Understand that the mixer is a preamp.
What output on the mixer?
My answer is unchanged from the previous post. Main outs are variable determined by the gain controls while tape outs are fixed.
edit: Look at figure 5.1 in the 8002 manual
Edits: 07/08/15Follow Ups:
Ok, I'll give that a try. Can I do damage to the mixer in any way?
Don't overload its inputs nor short its outputs - caveats for virtually any component.
Once again, the mixer is fundamentally a mic and line preamp designed to drive a power amp - as you see in the diagram.
I confess that I'm not too keen on the sound of Behringer gear that uses handfuls of 4580 ICs, but it will work just fine.
I'll try that when I return home soon.
Thank you!! I'll let you know what happens. Fingers crossed.
Remember that you will need adapter plugs from the preamp's phone plug output to the power amp's RCA inputs. Those were required when I once used a Behringer EQ.
Here's an example from Parts Express
Good luck!
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: