|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
74.38.201.140
In Reply to: RE: Krell Tape Input/Output Routing Device posted by Ballou on February 16, 2015 at 18:40:03
OK you said you want to hook up a reel to reel and a tuner. Is that all?
Next do you want to be able to record on the reel to reel?
Are there any other tape decks?
So if it is just the two pieces you mentioned connect the output of the reel to reel to what is labeled as "input 2" on the project with a set of RCA cables.
Connect the tuner to "input 3" on the project with a cable with RCA's on one end (assuming that's what the tuner requires) and a stereo 3.5mm stereo mini plug on the other end which plugs into "input 3".
Connect the power supply (required for the relays to switch between the projects inputs) and connect the "output" to aux if you have it on your preamp. You can use "tape in" on your pre amp but you won't be able to record from the tuner this way.
If it is just one tape deck connect a set of cables from "tape out' on the pre amp to "tape in" or whatever the input is called on your reel to reel. This way when the tuner is selected you can record from it on the reel to reel.
E
T
Follow Ups:
ET thanks very much for the very quick response. Now the 3.5mm inputs make sense. I hope someone from Pro-Ject is reading this because the instructions for their device do not come close to mentioning using 3.5mm stereo mini cables to install it to anything! Nothing!!
After my last post I Google'd Pro-Ject Switch Box. I got Niles Audio Corporation AXP-1 Auxiliary Input Selector for $99.00. The Niles instructions are very clear. Assuming the ratings are legit, it is highly rated on Amazon and I've heard of Niles Audio.
Had my Google search come up with Niles 10 months ago I would have purchased it instead of the Pro-Ject. It's 11 pm on the east coast. I do not have any 3.5mm stereo mini cables. Will get one ASAP and attempt to install per your instructions.
Lastly, I would like to record to my reel-to-reel from my CD player if possible.
So I take it that the CDP is plugged into S2. So choose S2 and make sure the tape out on the Krell is plugged into the reel to reel as discussed.
E
T
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: