|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
109.129.225.213
In Reply to: RE: "In the context of my system ..." posted by Dave Pogue on January 13, 2015 at 05:14:16
Well at the risk again of not being taken seriously because my system is partly vintage and DIY and didn't cost as much as a new car (have no problem with megabucks stuff, can't afford it, wich somehow seems to force me to be confined to the "vintage" section of this forum, sadly enough) here's the stuff I use:
SPEAKERS: Klipsch LaScala base. Only bass horn, bass driver and midrange driver are original. Midrange horn is EV SM120A. Tweeters are Beyma cP25. Passive crossovers are the now (sadly) discontinued ALK engineering "Universal" klispch heritage replacement networks, wich are based on the Klipsch "type AA" network, adding filtering of the midrange section's upper end, the ability to change midrange setting trough various transformer taps while keeping the global impedance 8ohms flat, and making use of Hovland "Musicaps" and litz-wire coils.
They sound very different from the original LaScala, only keeping the high sensitivity, huge dynamics, and fast articulated bass.
PREAMP: a very rare device, Korn&Macway SP100, Belgian brand that relocated in the USA somewhere in the 80's. Probably unheard of on this forum, but it's a fantastic preamp, said (and i'm expecting some criticisms again for quoting this, but whatever) to be in the same league as the famed Treshold "FET" series of preamps from the same era. All I can say is that it sounds indeed great, and is built to very high standards inside and out. Again, here, I'm expecting the nay-sayers to show their nose and say that you can't take seriously a preamp that is not a known reference in the audio world. Blah.
SOURCE: the cheapest of all, KENWOOD DP7090 from the nineties, recommended and awarded at the time as one of the best deals in the digital world, finishing third in a "Nouvelle Revue Du Son" french magazine just behind megabuck players from Cairn and Copland, and before players costing two to four times it's price. Nowadays it's still a more than decent player, but it's Kenwood and it was "cheap" to start with so again I don't expect to be taken seriously.
CABLES: VanDenHul "the integration hybrid" interconnects troughout, QED "original" speaker cables due to the long lenghts I had to get for my bigger than average listening room.
Add in two reflex-loaded "pro" drivers, a 15inch and a 18inch, respectively from Beyma (SM115K) and BagEnd, driven from the same Miller&Kreisel sub amp, crossed at 50Hz.
Due to severe budget restrictions I always had to have a non-conventional view on high quality audio, mixing and matching and making the best out of what I could afford. On the other hand, I'm not musician myself but I come from a family of music lovers, my cousin being a now well regarded jazz guitar player, with already a few widely and worldly available albums signed with difefrent labels, his wife being a jazz singer and teacher at the Music Conservatory in Berlin, and myself having very eclectic taste in music, I believe I know what music is supposed to sound like.
I realise how "defensive" this all sounds but i'm a bit tired of reading always the same doubts concerning us "bottom feeders" and our ability to understand the magic and science of good sound.
Follow Ups:
I owned Klipsch La Scallas many years ago in college. Mine were stock so I have no idea what your changes have done to the sound for better or worse. Today I find the stock version a bit too colored but still a lot of resolution and fun.
Preamp: Never heard of it.
Regarding your source: the KP7090 has a lot of potential actually:
http://www.lampizator.eu/lampizator/REFERENCES/Kenwood7090/Kenwood%20CD%207090%20CD%20player%20lampizator.html
My advice if you are a bit handy with a soldering iron is to Lampizate it!! You are probably throwing away a ton of its potential running stock. If you lampizate it then it will be a serious machine despite the humble origins. A lampizator kit is not very expensive.
Your sub arrangement is unconventional to say the least, why two different subs? Why not two of the 15 or two of 18?
I realize what hifi on a budget is like. For a long time I didn't think the amp mattered at all because all I could afford were budget receivers that all sounded similar. Then I got to hear some good stuff and realized it all matters. When I was reviewing I got to hear the REALLY good stuff and was living with a top shelf violinist and making recordings etc. That was the real education.
What I would suggest though is to read some research into sound quality from real scientific inquiries and draw your own conclusions. You may not think it applies to you but at least see what guys who have really thought about these issues and studied them have to say.
I got quickly bothered by the LaScala's beamy midrange horn and rough response. But I didn't want to give up on them. I'm very happy about the outcome, they are as dynamic as ever, but are now much smoother, with a wider sweet spot, much better imaging, and above all they're now truly resolving and transparent as opposed to just "sensitive" and "difficult" as they were before, if you see what i mean (letting you hear more of the music and the recording instead of being just amplifier-picky - wich they still are)
The preamp is great, but it has quite a lot of gain wich proved problematic when used with some other power amplifiers but strangely enough seems to match perfectly with the little T-amp. That was my biggest fear. I'm joining a link to some internet pictures of it, if you care to have a look.
I've read about the "lampizated" kenwood already, I would love to do that indeed, problem is I'm not so good with a soldering iron (yet)... changing big caps on a board I might learn to do, but this seems to be more difficult with smaller parts involved, smaller PCB tracks... one day maybe, or i should find someone handy to do it for me.
To answer one of your previous posts (that for some reason I hadn't seen), no I never tried SET amps, budget and practicality (other, non-audiophile people using the system) make it an impossibility so far. Right now very happy with what I have ;)
I have a Kinergetics KCD-55 Ultra DAC from the early 90s that uses the rare and expensive UltraAnalog 20 bit DAC modules (it made this model nearly double the price of it's sister that used the also very good Burr Brown PCM-63K DAC). BUT the output stage broke. So now I have a Lampizator Amber output stage that I am tapping off of the DACs. I haven't got it all working yet (some technical issues) but I think it is gonna be my last DAC. I also have the Monarchy Audio M24 DAC, which is also superb (BB PCM63K chips tube output, no opamps or transistors) but I think the Kinergetics will beat it.
I have Odeon "La Boheme" speakers, which use a folded horn and a 1 inch compression driver for the tweeter but in a spherical wooden horn. As near as I can tell this results in close to zero coloration form the horn...it is probably the best I have heard from a horn in that regard. They are a bit lower in sensitivity than the Klipsch (98 vs 104) but it still takes but a few watts to get LOUD. I run either a parallel SET with 300B tubes (JJ 322) or my NAT Symbiosis SET hybrid. The NAT is a bit overdamping the speakers so it is a bit leaner sounding with this amp and the JJ is fuller sounding. Horns really don't need the amp to make a lot of damping.
I have a Kinergetics KCD-55 Ultra DAC from the early 90s that uses the rare and expensive UltraAnalog 20 bit DAC modules (it made this model nearly double the price of it's sister that used the also very good Burr Brown PCM-63K DAC). BUT the output stage broke. So now I have a Lampizator Amber output stage that I am tapping off of the DACs. I haven't got it all working yet (some technical issues) but I think it is gonna be my last DAC. I also have the Monarchy Audio M24 DAC, which is also superb (BB PCM63K chips tube output, no opamps or transistors) but I think the Kinergetics will beat it. - morricab
I have a Stax quattro 2 CDP from that era that I was very fond of , very non digital sounding ....havent used in years , should re-cap and give it a go again ...
Regards
Edits: 01/18/15
I was looking into that one but I found out that the Ultraanalog digital receivers went Kablooey after some years due to overheating, so I have steered away now from models that used it. Apparently they were great until they died.
nt
try it! you know you want to!
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: