|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
107.210.229.45
Any comments or advice from current Vitus RI-100 Integrated Amp owners who are using it with REL G2 subs or any REL subs for that matter - even past models like the Stentor and Studio? This would be a two channel only (non home theater) two subwoofer configuration using the high level neutrik connection from the sub to the amp speaker terminals and/or the chassis. Its not clear if the RI-100 is differential or standard or some kind of hybrid - thats why some real experience with successful results would be very helpful.
Follow Ups:
Best thing is to call a dealer or the manufacturer. Sumiko makes a special cable for differential amplifiers to use on the REL subs. It costed about $150 a few years ago when I bought it to hook up a pair of W4S ST-500s (active biamping) with a REL Strata III.
Edits: 12/11/14 12/11/14
Contact Vitus for the best information.
Amplifiers whose negative binding posts are not designed to be connected to ground usually clearly state that on the back. This would rule out the use of the RELs AFAIK, since they have one 'ground' wire and one each to the channels. I would contact the manufacturer directly first, because this can be a bad mistake. Cheers.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: