|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
68.214.92.64
In Reply to: RE: Signs of amp failure, need advice posted by fanglangzhe on May 20, 2012 at 02:01:56
What kind of amplifier are you using? It sounds like the volume control could have issues with dirty contacts and I would start with a good cleaning with some Deoxit. This would need to be sprayed into the control from the inside of the amplifier (not just down the shaft from the outside). If you are not familiar with this product or how to best use the contact cleaner there are U tube videos you can look at. Once you spray the Deoxit into the volume control you rotate it back and forth a number of times to help the cleaning process and this may eliminate your issue.
Rick
Follow Ups:
Thanks for the advice. Its a NAD S300 int amp purchased in 1999.
Good advice that is what I would do too dirt can be very nasty to any audio system. Cleaning cant hurt it as long as it is done right.
If it has one, clean it (or replace it).I have seen this problem with NAD, even with new amplifiers.
Edits: 05/20/12 05/20/12
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: