Posted by AnandR (A) on November 06, 2004 at 06:00:50

Ok, here is what you do:
A) Download the Lundahl 1676 PDF file and read it, its on Lundahl's website.

B) Remember to look at the 1676 from the COMPONENT side and **not** the PIN side. In other words, it is mapped out as if you are looking at the transformer from the top, using x-ray vision to see the pins underneath. Mark the pin numbers with a pencil so you don't goof!

C) For wiring it 1:1 do this:

1. Connect pin 6 to pin 10
2. Connect pin 7 to pin 9
3. Designate pin 6 as your input and connect this to your RCA jack signal IN.
4. Connect pin 10 to ground and to the ground tab of your RCA jack.
5. Connect pin 1 to pin 4.
6. Connect pin 2 to the signal IN part of your attenuator.
7. Connect pin 5 to ground.
8. Connect pin 8 to ground.

Best,
Anand.