Tube DIY Asylum: hookup wire for TVC switchbox by louie3 Do It Yourself (DIY) paradise for tube and SET project builders.

For Sale Ads FAQ / News / Events

Posted by louie3 on August 18, 2012 at 11:19:58

I posted this holler for help on the Amp-Preamp forum, but it may be more appropriate here.

I use a TVC preamp with only one input, so I made up a source switching box from using the chassis of an old, long dead preamp, an Elna switch and some rca plugs.

The output of the switch box goes through a pair of half-meter (or less) interconnects to the TVC.

My question is, the wire I used in the switch box is not all the same, what would be the concensus on the best possible internal wire to use for the switch box.

I have looked at Cardas litz hook up wire, but it is a bitch to solder without a solder pot, which I don't have. There are also several exotic hookup wires available from Michael Percy.

Anybody have a preference?

This post is made possible by the generous support of people like you and our sponsors:

Atma-Sphere Music Systems, Inc.

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---