|
High Efficiency Speaker Asylum: RE: 20dB of Boost ? by Synthsayer Need speakers that can rock with just one watt? You found da place. |
For Sale Ads |
98.65.238.36
In Reply to: 20dB of Boost ? posted by djk on January 8, 2010 at 23:53:13:
Whatever you could suggest as a passive EQ/Pad would be greatly appreciated. I used Jeff Bagby's Passive Crossover designer to start with a contour filter. What it came up with that looked 'okay' was 8uf in parallel with 20 ohm resistor.
I haven't had enough time to fully evaluate it yet.
This post is made possible by the generous support of people like you and our sponsors:
Topic - Crossover point for Altec 816/JBL E140 & EV DH1012/HR9040 - Synthsayer 21:51:20 01/6/10 ( 27)
- RE: Crossover point for Altec 816/JBL E140 & EV DH1012/HR9040 - Pro Sound Guy 07:09:09 01/7/10 ( 26)
- RE: Crossover point for Altec 816/JBL E140 & EV DH1012/HR9040 - Synthsayer 21:55:08 01/7/10 ( 12)
- RE: Crossover point for Altec 816/JBL E140 & EV DH1012/HR9040 - David Yost 05:43:33 01/8/10 ( 11)
- RE: Crossover point for Altec 816/JBL E140 & EV DH1012/HR9040 - Synthsayer 07:02:21 01/8/10 ( 10)
- RE: Crossover point for Altec 816/JBL E140 & EV DH1012/HR9040 - David Yost 13:21:25 01/8/10 ( 9)
- 20dB of Boost ? - djk 23:53:13 01/8/10 ( 4)
- RE: 20dB of Boost ? - Synthsayer 15:23:11 01/26/11 ( 0)
- RE: 20dB of Boost ? - Synthsayer 01/9/10 12:49:16 01/9/10 ( 2)
- RE: 20dB of Boost ? - djk 13:31:57 01/9/10 ( 1)
- RE: 20dB of Boost ? - Synthsayer 13:37:16 01/10/10 ( 0)
- RE: 20dB of Boost ? - David Yost 08:31:54 01/9/10 ( 0)
- RE: Crossover point for Altec 816/JBL E140 & EV DH1012/HR9040 - Synthsayer 15:14:04 01/8/10 ( 0)
- RE: Crossover point for Altec 816/JBL E140 & EV DH1012/HR9040 - Synthsayer 14:42:49 01/8/10 ( 2)
- I guess I need to elaborate.... - David Yost 15:02:28 01/8/10 ( 1)
- RE: I guess I need to elaborate.... - Synthsayer 00:54:50 01/13/10 ( 0)
RE: Crossover point for Altec 816/JBL E140 & EV DH1012/HR9040 - Synthsayer 16:10:56 01/7/10 ( 12)
- RE: Crossover point for Altec 816/JBL E140 & EV DH1012/HR9040 - Pro Sound Guy 05:49:27 01/8/10 ( 7)
- RE: Crossover point for Altec 816/JBL E140 & EV DH1012/HR9040 - Synthsayer 07:08:54 01/8/10 ( 6)
RE: Crossover point for Altec 816/JBL E140 & EV DH1012/HR9040 - Pro Sound Guy 05:45:47 01/8/10 ( 0)
RE: Crossover point for Altec 816/JBL E140 & EV DH1012/HR9040 - djk 18:00:55 01/7/10 ( 2)
- RE: Crossover point for Altec 816/JBL E140 & EV DH1012/HR9040 - Synthsayer 03:51:06 01/18/10 ( 0)
RE: Crossover point for Altec 816/JBL E140 & EV DH1012/HR9040 - Synthsayer 21:27:32 01/7/10 ( 0)