Planar Speaker Asylum

Welcome! Need support, you got it. Or share your ideas and experiences.

Return to Planar Speaker Asylum


Easy stator replacement

206.47.0.171


[ Follow Ups ] Thread:  [ Display   All   Email ] [ Planar Speaker Asylum ]
[ Alert Moderator ]

Stator replacement by the way is completely user serviceable and quite easy to do:

1. Remove the back panel which houses the circuit boards, this requires
removing 4 screws.

2. Remove the back frame of the electrostatic, this requires
removing several more screws.

3. Disconnect the stator panel from the circuit board by disconnecting 4
plugs (cables) - very easy. A fifth lead is removed by loosening a small
screw.

4. Remove the stator.

5. To fit a new one you just do the reverse of above !

** All this should be done in a very clean environment with the
electrostatics disconnected from the mains !!

The DCI-LT (Ben Peters version) model requires that you unsolder the
connections between stator and circuit board and then re-solder a new one.


This post is made possible by the generous support of people like you and our sponsors:
  Atma-Sphere Music Systems, Inc.  



Topic - REVIEW: Audiostatic Wing Speakers - s.hum 07:59:37 01/13/04 ( 21)