Welcome! Need support, you got it. Or share your ideas and experiences.
Return to Planar Speaker Asylum
64.171.6.33
In Reply to: rewiring question posted by Scott 2.6/R on December 22, 2003 at 21:49:43:
I used the quad litz Teflon-insulated silver wire from Silver Audio. It is four 24-gauge, individually insulated wires twisted togther to make an 18 gauge-equivalent bundle. The Teflon is easy to strip with a new, sharp tool, and one has to twist and solder the ends together.I use Silver Audio cables throughout, so this makes a good continuity with them.
My speakers now look like a mad scientist made them, as I allow the quad litz to dangle in the air behind the drivers rather than force it to snuggle up with the poor dielectric that the fiberboard panel represents.
This post is made possible by the generous support of people like you and our sponsors:
Topic - REVIEW: Magnepan Magneplanar MG12 Speakers - Marc Bratton 14:24:19 12/22/03 ( 6)
- Forgot to mention the best part of the 12's vs MMG's... - Marc Bratton 10:52:15 01/1/04 ( 0)
Thank you! - Leisure7 15:31:02 12/22/03 ( 4)
- rewiring question - Scott 2.6/R 21:49:43 12/22/03 ( 2)
- Re: rewiring question - Leisure7 12/28/03 21:12:06 12/28/03 ( 0)
- Re: rewiring question - Marc Bratton 19:53:56 12/23/03 ( 0)
Re: Thank you! - Marc Bratton 16:35:38 12/22/03 ( 0)