|
Cable Asylum Interconnects, speaker wire, power cords. Ask the Cable Guys. |
For Sale Ads |
Use this form to submit comments directly to the Asylum moderators for this forum. We're particularly interested in truly outstanding posts that might be added to our FAQs.You may also use this form to provide feedback or to call attention to messages that may be in violation of our content rules.
Original Message
Re: My questions
Posted by Steve Eddy on June 26, 2003 at 11:08:43:
Actually my Q1 is related to Q2. In Q1, since dielectrics are said to be not perfectly linear and can distort the signal (eventually sound I assume), I don’t know if the thickness of the dielectrics play a part in the degree of this nonlinearity (or sound distortion)?
Yes, it plays a part in how much the nonlinearity can affect the signal. The thinner the dielectric, the less effect any nonlinear polarization of the dielectric can have on the signal.
In the A2, it seems that because of increased (due to thinner dielectric) or decreased (thicker dielectric) capacitance, it brings different degree of distortion.
But the volume of the dielectric diminishes to a degree greater than the electric field increases which means that unless there is some highly unusual distortion behavior, the thinner dielectric will result in less distortion of the signal.
How about the thickness if the same dielectric is used for both the cables (thicker dielectric & thinner dielectric)?
That would be even more advantageous than a better but thicker insulation versus a worse but thinner dielectric.
In my last post, comparing Teflon to Teflon for both the thick and thin dielectric, the thick Teflon increased capacitance by a factor of 1.85 times what it would be with no dielectric and the thin Teflon increased capacitance by a factor of 1.25 times what it would be with no dielectric.
(p.s. sorry for the not-so-well organised questions)
No problem. We'll get it sorted out. :)
se