RE: Dissagree

Posted by John Elison (A) on March 7, 2010 at 22:25:07

In Reply to: RE: Dissagree posted by nevillekapadia on March 7, 2010 at 11:57:07:

If readjustments do not correct the problem, it could be a vinyl stamping issue. I have read about this here in the Asylum that sometimes the vinyl does not flow outward from the center of the press correctly and the left channel (inner groove wall) usually suffers most.

Good luck,
John Elison

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - LP pressing fault or set up issue? - nevillekapadia 03:08:12 03/07/10 (16)

A far safer method of cleaning your stylus - Muzikmike 08:58:36 03/07/10 (6)

RE: A far safer method of cleaning your stylus - Biff 10:10:17 03/07/10 (5)

RE: A far safer method of cleaning your stylus - Fred J 11:27:04 03/07/10 (1)

I don't know, but I quit using the crap. /nt - Biff 12:08:34 03/07/10 (0)

Wow! - Muzikmike 10:39:19 03/07/10 (2)

the trouble is that you can't ensure the liquds are not travelling up on the cantilever... - kuma 13:31:44 03/07/10 (1)

RE: the trouble is that you can't ensure the liquds are not travelling up on the cantilever... - Fred J 13:45:28 03/07/10 (0)

My take... - JeffH 07:28:21 03/07/10 (0)

RE: LP pressing fault or set up issue? - astralnavigator 06:04:51 03/07/10 (0)

RE: LP pressing fault or set up issue? - Fred J 05:07:08 03/07/10 (6)

Dissagree - rocky raccoon 06:19:09 03/07/10 (5)

RE: Dissagree - Fred J 07:55:22 03/07/10 (4)

RE: Dissagree - astralnavigator 08:51:02 03/07/10 (3)

RE: Dissagree - kotms 10:59:38 03/07/10 (2)

RE: Dissagree - nevillekapadia 11:57:07 03/07/10 (1)

RE: Dissagree - John Elison 22:25:07 03/07/10 (0)

Follow Ups

RE: Dissagree - John Elison 22:25:07 03/07/10 (0)

RE: Dissagree

Post a Message!