Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: Grab 2 or 3 different universal protractors... posted by Nicholas Renter on October 13, 2009 at 06:01:26:
I have printed out one of Conrad's protractors and there is a difference. Though the alignment seems spot on, the point is different by a very small amount. This was from a casual observance without measurements. However the point on both nulls are towards the spindle by the same amount on Conrad"s (I believe).
Like John, I have used my ortofon protractor for years without any groove distortion. But I have wondered if there are errors in the setup process of the various manufacturers of these protractors. I'll be setting up a new TT in a few days and will check with both
Thanks
=========================
You paid HOW MUCH for that electrical receptacle?!!! Are YOU nuts?
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Grab 2 or 3 different universal protractors... - artemus 06:54:51 10/13/09 (3)
- Make sure... - Nicholas Renter 10:40:28 10/13/09 (2)
- RE: Make sure... - John Elison 10:43:24 10/13/09 (1)
- Yes and no... - Nicholas Renter 11:44:28 10/13/09 (0)