Home Vinyl Asylum

Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ.

Re: Setting up your FIRST Cartridge.....

216.19.0.85

Thorsten,

Thanks - this is a great tutorial. I am having a problem with my new Rega Planar 3 and Exact cartridge that this may help to solve. After setting up the cartridge pretty much per your procedure, I could not get the cartridge to track but the first, easiest track on the HFNRR test record. All other tracks resulted in a loud buzzing on both channels regardless of bias adjustment on the RB300. Increasing the tracking force to over 2.5 grams seemed to help, but this seemed a bit much. The cartridge did not sound that bad on most records, however.

Inspecting the cartridge with a microscope revealed a slight, maybe 10 degree horizontal rotation of the cantaliever and stylus (along the long tonearm axix) with respect to the headshell.

I installed an old Stanton 681EEE cartridge in the arm and it seemed to track the bias tracks well - all but the last one. Of course, VTA was way off for this case.

Steve Lauerman at Rega has been very accomodating so far - he is sending me a new cartridge to compare with my old one. I didn't try zeroing the stylus force spring and using the counterweight only like you suggested - this may help. I'll keep you posted on the results with the new cartridge.


This post is made possible by the generous support of people like you and our sponsors:
  Crux Audio  


Follow Ups Full Thread
Follow Ups
  • Re: Setting up your FIRST Cartridge..... - PC Dude 11:54:06 04/16/99 (0)


You can not post to an archived thread.