"....without too much suction...."

Posted by powermatic (A) on January 23, 2008 at 11:40:07

In Reply to: Which vacuum for DIY record cleaning machine? posted by HOK on January 23, 2008 at 08:17:54:

I'm not sure how this became a 'problem', but I'm pretty sure you won't have an issue unless you buy something like this:

But even if you do, the suction can be easily attenuated by drilling a hole in your cleaning wand before the cleaning lips. Yes, that's right: A hole in your sucking wand, before the sucking lips. What? How can I explain this any differently? You've got the wand, you've got the sucking lips, put a hole in the wand before the lips! What could be simpler? Sheesh......

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - Which vacuum for DIY record cleaning machine? - HOK 08:17:54 01/23/08 (11)

Thanks for the replies! nt. - HOK 21:45:59 01/23/08 (0)

Wally World sells a small - Detailman 21:27:59 01/23/08 (0)

"....without too much suction...." - powermatic 11:40:07 01/23/08 (0)

Maybe check the local thrift for a used vac that you can canibalize. nt - Dan_ed 11:05:01 01/23/08 (1)

RE: Maybe check the local thrift for a used vac that you can canibalize. nt - cactuscowboy@bresnan.net 09:01:14 01/24/08 (0)

RE: Which vacuum for DIY record cleaning machine? - Bry 08:23:18 01/23/08 (6)

How you handle the suction head w/o touching the LP surface? (nt) - cheap-Jack 13:06:31 01/23/08 (5)

YOU CAN'T HANDLE THE SUCTION!! - powermatic 20:19:21 01/23/08 (0)

RE: How you handle the suction head w/o touching the LP surface? (nt) - Time_Stands_Still 15:28:38 01/23/08 (3)

My alternate felt attachment/What is "suction break"? - ParloFax 06:39:41 01/24/08 (0)

RE: How you handle the suction head w/o touching the LP surface? (nt) - timp 20:43:40 01/23/08 (0)

Good idea as to the suction bleeder hole. - Olly 20:09:52 01/23/08 (0)

Follow Ups

"....without too much suction...." - powermatic 11:40:07 01/23/08 (0)

"....without too much suction...."

Post a Message!