Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: according to Ed's DB both the 301 & 304 are compatable with a medium mass Rega RB250 arm. posted by OMalley on September 17, 2006 at 18:44:21:
Don't forget that Denon publishes their data at 100Hz. We need the compliance measured at 10Hz.DL-103R: 5cu @ 100Hz = 9cu @ 10Hz.
DL-301 II: 13cu @ 100Hz = 24cu @ 10Hz.
DL-304: 14cu @ 100Hz = 26cu @ 10Hz.The figures at 10Hz are not fact of course but I believe they come pretty close.
Fastener mass = 0.5-1.0g.
Recommended system resonance = 8-12Hz.
RB250 + DL-103R = 11.5Hz system resonance.
RB250 + DL-301 II = 7.8Hz
RB250 + DL-304 = 7Hz.This is all just theory of course...
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: according to Ed's DB both the 301 & 304 are compatable with a medium mass Rega RB250 arm. - krenzler 19:04:15 09/17/06 (3)
- so based on that - OMalley 19:37:39 09/17/06 (2)
- Re: so based on that - krenzler 21:35:38 09/17/06 (1)
- It's also about synergy - J Harris 07:27:45 09/18/06 (0)