Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: Re: Stylus Shape: Spherical vs Elliptical? posted by John Elison on September 16, 2006 at 16:28:57:
SirAnthony,Rake angle applies when the contact area is taller than wide, and therefore represents a sort of line on the wall. The contact area runs up and down each 45 degree wall, but will appear almost vertical when viewed from the side. The deviation from vertical is the rake angle. Records must be cut with the stylus at an angle, so the SRA is usually around 18-22 degrees.
-Bry
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Rake angle - Bry 18:05:43 09/16/06 (3)
- Re: Rake angle - Thomas_A 08:00:36 09/17/06 (0)
- Re: Rake angle - John Elison 18:30:43 09/16/06 (1)
- Re: Rake angle - Bry 19:49:23 09/16/06 (0)