Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
I recently bought a SP-10 Mk2A, including the Service Manual. A friend with good electronics experience and a full test bench went through the measurements and adjustments section and everything looked good. However, all three speeds run fast, which was verified with an external strobe.If you might be able to help, send me an E-mail (Subject: SP-10 help) or post yours so I can provide more detailed info.
Any assistance or leads will be appreciated.
This post is made possible by the generous support of people like you and our sponsors:
Topic - HELP PLEASE - anyone with technical experience with Technics SP series? - M3 lover 16:34:57 09/14/06 (11)
- This isn't one of those 50Hz vs 60Hz things, is it? - bangsezmax 13:38:20 09/15/06 (0)
- Spindle bearing cleaned and oiled, adjustments made per Service Manual. - M3 lover 10:08:05 09/15/06 (3)
- To be expected - Mark Kelly 16:32:07 09/15/06 (2)
- Mark - more info - M3 lover 17:16:59 09/15/06 (1)
- No manual - Mark Kelly 17:46:17 09/15/06 (0)
- PING Mark Kelly... - daviddeep 10:07:17 09/15/06 (1)
- Too general - Mark Kelly 15:48:34 09/15/06 (0)
- My non-technical experience with a Panasonic SP10 has been . . . - hiatt@alaska.net 18:47:21 09/14/06 (1)
- Oiling - Panelhead 20:43:54 09/14/06 (0)
- Do you have the service manual? - HenryH 16:56:22 09/14/06 (0)
- DOes it have a pitch adjustment feature? - Scottrt 16:39:05 09/14/06 (0)