Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: "48.5 db of gain in the phono stage" is not enough output for either of the cartridges. Also you loading (47k) is not a posted by artemus on September 12, 2006 at 10:11:48:
Even a 1.10 with either of those cartidges will be way too much with 48dB gain in the phono section.A SUT is the way to go with the preamp but with a lower output cartridge, say 0.2mV.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- A step up transformer is probably not the solution either. - Garth 13:21:44 09/12/06 (8)
- Garth, I'll disagree from experience - Doug Deacon 08:34:01 09/13/06 (1)
- For every rule there is an exception. - Garth 08:42:28 09/13/06 (0)
- soory ...what is a SUT? - soundquest 08:17:16 09/13/06 (1)
- SUT? = STEP UP TRANSFORMER - we call that in the trade a ... - Garth 08:21:42 09/13/06 (0)
- I'm using a 1:10 tranny with 65 db gain Wright phono preamp. - artemus 13:41:06 09/12/06 (3)
- There is no "Standard" but 30-40dB tops is usual. The Wright is known for ... - Garth 13:45:22 09/12/06 (2)
- I've run a .23 Dynavector and a .5 Goldring Elite with no problems. - artemus 14:01:30 09/12/06 (1)
- Read it hear. I don't have one. - Garth 14:06:13 09/12/06 (0)