Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: www.bocabearings.com posted by Panelhead on September 11, 2006 at 09:16:01:
....a veritable alchemcal transmutation of the humble Rega into a bona-fide super-arm, by the sound of it.How much are those bearings?
Do you intend to use slightly more 'preload', and hence achieve less play than the standard bearings?
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups Full ThreadTopic - Rega counter weights (again?!) - Aleksunder 06:07:53 09/11/06 (77)
- Re: Rega counter weights (again?!) - recapitulation - Aleksunder 06:55:01 09/12/06 (0)
- If you assume you make ..... - Stale 10:58:16 09/11/06 (4)
- Re: If you assume you make ..... - Aleksunder 12:15:41 09/11/06 (3)
- Re: If you assume you make ..... - Stale 15:13:31 09/11/06 (1)
- I both agree and disagree with you....yes I am conflicted.... - tubesforever 00:18:11 09/12/06 (0)
- Re Imeant " about 1.8HZ up", not 33.3 HZ. n/t - Aleksunder 12:37:37 09/11/06 (0)
- You are assuming stuff.... - tubesforever 08:58:56 09/11/06 (54)
- Re: So if a solid underslung weight doesn't effect VTF ... - Aleksunder 10:23:09 09/11/06 (26)
- Re: also .... - Aleksunder 10:32:50 09/11/06 (25)
- Again this is simple..... - tubesforever 12:10:26 09/11/06 (24)
- I think you are wrong here. - NewStevo 15:18:32 09/11/06 (0)
- Re: Again this is simple..... - Aleksunder 13:02:00 09/11/06 (3)
- The lower you hang the mass the more it delays return to vtf - tubesforever 14:57:26 09/11/06 (0)
- Re: but to complicate things .... - Aleksunder 13:26:07 09/11/06 (1)
- I am modeling this at the moment. - tubesforever 15:07:51 09/11/06 (0)
- Re: Again - J.D. 12:30:58 09/11/06 (18)
- On a software platform called Alias, using a Unix 128 bit processor. - tubesforever 15:14:20 09/11/06 (17)
- Don't forget to patent the intellectual property as well. - powermatic 19:01:14 09/11/06 (1)
- I have a customer that just came back from Bejing..... - tubesforever 23:34:59 09/11/06 (0)
- By Alias I assume you mean Maya, as it has been called for some years? - raphsdad 17:13:31 09/11/06 (3)
- Maya is for cgi and movies, Alias was designed for manufacturing. - tubesforever 19:44:00 09/11/06 (2)
- Alias is a company. - raphsdad 19:56:09 09/11/06 (1)
- Re: Alias is a company. - tubesforever 23:25:52 09/11/06 (0)
- Yep, my Flying-squirrel-powered Space Shuttle is in the Patent-pending phase, too ....... - J.D. 16:55:52 09/11/06 (8)
- JD have I ever NOT built something I was talking about. - tubesforever 19:45:46 09/11/06 (7)
- actual pic from the testing lab - J.D. 20:11:41 09/11/06 (6)
- So.....JD....You are just jealous....... - tubesforever 23:29:51 09/11/06 (5)
- Re: Solution - J.D. 08:31:32 09/12/06 (4)
- JD your drugs are wearing off.....dose up a bit..... - tubesforever 00:13:50 09/13/06 (1)
- Deal - J.D. 11:01:10 09/13/06 (0)
- McSweeney's - OMalley 09:58:31 09/12/06 (1)
- practically an extended haiku ...... - J.D. 11:53:40 09/12/06 (0)
- I am familiar with Alias..... - vinyl-addict 16:45:00 09/11/06 (1)
- And I don't want my friend fired! - tubesforever 19:54:12 09/11/06 (0)
- Not O'Malley's mod - OMalley 10:10:53 09/11/06 (0)
- Jim, you did it again. Hope you have on clean socks! - Garth 09:42:21 09/11/06 (25)
- Re: Strictly speaking the Graham's C/W is underslung ... - Aleksunder 11:08:07 09/11/06 (3)
- Yes, but I said eccentric not underslung ... and - Garth 11:30:28 09/11/06 (2)
- So how does the Graham stay straight and level? n/t - Aleksunder 13:13:56 09/11/06 (1)
- The outriggers set at the offset angle. Read the patent. - Garth 13:30:13 09/11/06 (0)
- It is the mass at the stylus tip which must be balanced in a tonearm - tubesforever 10:06:39 09/11/06 (20)
- What does that have to do with your stinking feet? :-) (nt) - Garth 11:32:41 09/11/06 (0)
- excuse me - OMalley 10:25:30 09/11/06 (18)
- Re: excuse me - Aleksunder 10:47:44 09/11/06 (17)
- Re: excuse me - OMalley 13:19:20 09/11/06 (13)
- Re: I guess so? - Aleksunder 13:39:03 09/11/06 (12)
- Re: I guess so? - OMalley 14:57:55 09/11/06 (3)
- It is my uneducated, unsupported guess that..... - tubesforever 16:27:56 09/11/06 (2)
- amigo, si, you are full of crap, as you say - OMalley 16:52:18 09/11/06 (1)
- Exactamundo. In principle only the stylus should move, the arm not. - Garth 12:07:29 09/12/06 (0)
- They are equidistant, at least on a 250. The 300 and up may be a different story. - Garth 13:45:00 09/11/06 (7)
- "They are equidistant, at least on a 250." - ahem, and this is another reason why the 250 is better than the 300 [nt] - OMalley 14:50:07 09/11/06 (1)
- For instance. ;-) (nt) - Garth 15:25:29 09/11/06 (0)
- Re: They are equidistant, at least on a 250. The 300 and up may be a different story. - Aleksunder 14:02:08 09/11/06 (4)
- One reason I bought the RB250 to tweak ...... - tubesforever 00:26:57 09/12/06 (0)
- Sorry, I forgot to blindly accept everything you say. :-) (nt) - Garth 15:24:32 09/11/06 (2)
- Re: Well, there you again, with the glib one-liner. n/t - Aleksunder 16:38:08 09/11/06 (1)
- You left the door open. Lighten up! n/t - Garth 23:34:42 09/11/06 (0)
- Do you really think there is movement there? - Garth 11:36:36 09/11/06 (2)
- Re: Do you really think there is movement there? - Aleksunder 12:25:54 09/11/06 (0)
- I agree with you Garth on this point and my stinky feet too! - tubesforever 12:20:02 09/11/06 (0)
- try this as well - OMalley 06:14:45 09/11/06 (15)
- Re: try this as well - Aleksunder 07:29:32 09/11/06 (0)
- Re: try this as well - Aleksunder 06:33:24 09/11/06 (13)
- Bells ring! So have you replaced the bearings? (nt) - Garth 06:35:54 09/11/06 (12)
- www.bocabearings.com - Panelhead 09:16:01 09/11/06 (4)
- Re: blimey..... - Aleksunder 10:18:13 09/11/06 (0)
- On the RB250 all four bearings are identical. - Garth 09:30:28 09/11/06 (2)
- Crap! - Panelhead 11:16:06 09/11/06 (1)
- Two vertical and two horizontal - all the same ...I've done it. :-( (nt) - Garth 11:49:39 09/11/06 (0)
- Re: Bells ring! So have you replaced the bearings? (nt) - Aleksunder 06:47:19 09/11/06 (6)
- And how do you measure that? 1/40 gram? Thanks for the info. (nt) - Garth 07:07:16 09/11/06 (4)
- Re: And how do you measure that? 1/40 gram? Thanks for the info. (nt) - Aleksunder 07:17:43 09/11/06 (3)
- I had my fingers calibrated and do the same thing. :-) (nt) - Garth 07:27:54 09/11/06 (2)
- Re: I had my fingers calibrated and do the same thing. :-) (nt) - Aleksunder 07:32:01 09/11/06 (1)
- Fingernails here. Close enough for old BMC products. :-) (nt) - Garth 07:41:11 09/11/06 (0)
- Re: BTW - that's 1/40g with the arm-wires. N/T. - Aleksunder 06:48:41 09/11/06 (0)
Follow Ups
- Re: blimey..... - Aleksunder 10:18:13 09/11/06 (0)