Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: Same protractor for all arm lengths. The problem is ... posted by Garth on September 9, 2006 at 12:00:11:
I used vinyleengine's Baerwald protractor. The null points are 66 mm and 120 mm from the spindle center.The Ikeda headshell is not fit for any third party cartridge so I use an Orsonic AV 101 B headshell.
I have two options; either follow Ikeda's suggestions on mounting distance (295 mm) and cartridge-headshell base distance (50 mm), or use an protractor as the reference. Assuming there is no third solution (such as use another tonearm since I just bought the Ikeda), which is the best solution?
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Same protractor for all arm lengths. The problem is ... - Sea Monster 18:39:18 09/09/06 (7)
- According to the manual .... - Garth 01:27:33 09/10/06 (6)
- Re: According to the manual .... - Sea Monster 03:38:25 09/10/06 (5)
- No, the manual is correct.... for use with this ... - Garth 04:10:09 09/10/06 (4)
- The measurement is in fact from stylus tip to headshell base - Sea Monster 06:25:40 09/10/06 (3)
- What does stylus tip to headshell base mean? - Garth 06:36:22 09/10/06 (2)
- Re: What does stylus tip to headshell base mean? - Sea Monster 05:09:59 09/11/06 (1)
- Less elegant than what? - Garth 05:19:29 09/11/06 (0)