|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
|
|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
Hi all,I recently changed the interstage capacitor (5uF) and its bypass capacitor (0.1 uF) of my ARC PH3 to Mundorf Silver Gold capacitors. Also, the circuit trace of about 20 cm connecting the output of the unit to the final element, a resistor, was upgraded with 24 AWG Jenna Labs cabling, changing termination to WBT Next Gen connectors.
The overall process took about 2 hours with careful planning and it is very much worth the effort. This changed the already beautiful device to a higher league on soundstaging, and treble performance, keeping all the good features.
Strongly recommended.
Cheers.
This post is made possible by the generous support of people like you and our sponsors:
Topic - Audio Research PH3 tweak - KK 11:07:32 09/09/06 (8)
- If you have the skill.... - damage k 11:59:52 09/09/06 (0)
- I understand that removing the final resistor also dramatically improves the sound. - tubesforever 11:43:33 09/09/06 (6)
- I think the final resistor sets the input impedance. - Garth 12:25:26 09/09/06 (5)
- If it is in the signal path it is setting the impedance, if it is to ground it is eliminating woofer pumping. - tubesforever 12:31:29 09/09/06 (4)
- The resistor setting the load impedance is a shunt to ground ... - Garth 04:32:11 09/10/06 (3)
- Re: The resistor setting the load impedance is a shunt to ground ... - Alex M 09:43:25 09/10/06 (2)
- Re: The resistor setting the load impedance is a shunt to ground ... - Alex M 03:35:23 09/11/06 (1)
- You tell me. (nt) - Garth 11:37:50 09/10/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
