|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
|
|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: Agree posted by mr.bear on August 6, 2005 at 00:54:25:
Both the KD 500 and KD 550 use a plywood arm board, circular and held with three hex carriage head bolts. So it is simple and easy to perform arm changes. I just popped in the Pete Riggle VTAF bronze bushing after a 1/2 hour of drilling and sanding and I am off to the races.I originally purchased a KD auto table but this is a sonic mid fi product at very best. So I had to go with the 500 set up.
I modified my stock KD-550 arm board for the Pete Riggle VTAF. This unit "decouples" the arm from the arm board and plinth. The sound is superb. And the VTA on the fly is seductive beyond imagination.
Cheers.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Actually no problem on arm mounting. - tubesforever 00:32:05 08/07/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
