Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: Custom Made Armboards posted by GGA on August 4, 2005 at 10:31:14:
Assuming the size and thickness fit your table, you could order a lead shot loaded, cocobolo armboard from Teres.They'll drill it for most tonearms, and I'd let them do it if possible. Cocobolo is the devil to work with. It eats tools and won't cut/drill cleanly unless yours are razor sharp and diamond hard. Cocobolo is so dense it can actually be drilled and tapped for machine screws. Mine has three #10-32 tapped holes for my tonearm mounting screws.
You might also be able to order an armboard from Galibier. Theirs are made of metal, but I forget what kind(s).
__________
"Do not meddle in the affairs of wizards, for they are subtle and quick to anger." - JRRT
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Custom Made Armboards - Doug Deacon 12:49:38 08/05/05 (1)
- Re: Custom Made Armboards - Just_Thom 23:50:41 08/05/05 (0)