Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: RE: it is a Stevenson if... posted by flood2 on February 15, 2017 at 14:45:49:
Hi Anthony,
> By focussing on the calculated linear offset, it should also be obvious now why Technics and Jelco do NOT use the (so-called)
> Stevenson alignment even when you fiddle Rmax for Inner null = 58.8 to try and get the overhang and offset.
Here is a graph of the Technics SL-1200 alignment. The linear offset is 86.160-mm. This is the average of the two alignment null-point radii, which are 58.80-mm and 113.52-mm. You are correct that this is not Stevenson's alignment for the commonly accepted IEC modulated groove envelope in-between 60.325-mm and 146.05-mm. It can only be Stevenson's alignment if you define the modulated groove envelope to be within 58.8-mm and 140.62-mm. It could also be Lofgren A if you define the modulated groove envelope in-between 53.464-mm and 140.62-mm.
.
I don't understand what you mean by focusing on the linear offset. The determining factor as to whether the Technics alignment is Stevenson's would be the modulated groove envelope.
Best regards,
John Elison
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Technics SL-1200 Alignment - John Elison 07:08:38 02/16/17 (39)
- RE: Technics SL-1200 Alignment - flood2 01:41:07 02/17/17 (38)
- RE: Technics SL-1200 Alignment - John Elison 02:48:15 02/17/17 (37)
- RE: Technics SL-1200 Alignment - flood2 23:04:22 02/17/17 (36)
- RE: Technics SL-1200 Alignment - John Elison 11:37:56 02/19/17 (35)
- RE: Technics SL-1200 Alignment - flood2 15:05:36 02/19/17 (12)
- RE: Technics SL-1200 Alignment - John Elison 18:16:17 02/19/17 (11)
- SME3009 Xinner ~=70mm!? - flood2 19:46:32 02/20/17 (10)
- RE: SME3009 Xinner ~=70mm!? - John Elison 11:21:16 02/21/17 (9)
- RE: SME3009 Xinner ~=70mm!? - flood2 17:06:14 02/22/17 (4)
- RE: SME3009 Xinner ~=70mm!? - John Elison 08:10:01 02/23/17 (3)
- RE: SME3009 Xinner ~=70mm!? - flood2 16:55:39 02/23/17 (2)
- RE: SME3009 Xinner ~=70mm!? - John Elison 21:30:29 02/23/17 (1)
- RE: SME3009 Xinner ~=70mm!? - flood2 02:20:20 02/24/17 (0)
- RE: SME3009 Xinner ~=70mm!? - flood2 16:08:03 02/22/17 (3)
- RE: SME3009 Xinner ~=70mm!? - John Elison 12:45:00 02/23/17 (2)
- We are in complete agreement! :) - flood2 14:30:44 02/23/17 (1)
- RE: We are in complete agreement! :) - John Elison 21:10:19 02/23/17 (0)
- RE: Technics SL-1200 Alignment - frankwm 11:53:55 02/19/17 (21)
- RE: Technics SL-1200 Alignment - John Elison 22:20:40 02/19/17 (19)
- RE: Technics SL-1200 Alignment - frankwm 00:23:11 02/20/17 (18)
- RE: Technics SL-1200 Alignment - John Elison 05:28:47 02/20/17 (17)
- RE: Technics SL-1200 Alignment - frankwm 05:41:45 02/20/17 (16)
- RE: Technics SL-1200 Alignment - John Elison 12:38:08 02/20/17 (15)
- RE: Technics SL-1200 Alignment - flood2 20:01:27 02/21/17 (14)
- RE: Technics SL-1200 Alignment - John Elison 07:31:02 02/22/17 (10)
- Stevenson's Socket... - frankwm 09:16:34 02/22/17 (9)
- Your right! - John Elison 00:29:47 02/24/17 (8)
- RE: Your right! - frankwm 02:27:29 02/24/17 (1)
- RE: Your right! - John Elison 12:41:44 02/24/17 (0)
- RE: Your right! - flood2 02:11:14 02/24/17 (5)
- RE: Your right! - John Elison 05:12:00 02/24/17 (4)
- RE: Your right! - flood2 01:41:02 02/25/17 (3)
- RE: Your right! - John Elison 05:45:32 02/25/17 (2)
- RE: Your right! - flood2 23:43:20 02/26/17 (1)
- RE: Your right! - John Elison 03:30:25 02/27/17 (0)
- RE: Technics SL-1200 Alignment - John Elison 05:55:20 02/22/17 (2)
- RE: Technics SL-1200 Alignment - flood2 15:08:48 02/22/17 (1)
- RE: Technics SL-1200 Alignment - John Elison 23:29:50 02/22/17 (0)
- RE: Technics SL-1200 Alignment - flood2 13:59:41 02/19/17 (0)