|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
|
|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: RE: are you designing your own tonearm? posted by user510 on February 14, 2017 at 10:19:16:
No I am not designing my own arm. The arm at issue here is Jelco 750, which I believe there is a consensus that if one wants to use the Lofgren A method, one has to largely ignore the maker's recommendation, because the suggested combination of P2S distance of 214 mm, effective length of 229 mm, and overhang of 15 mm would not work under Lofgren A.
Why do you say the shortest distance of a modern arm is 213 mm? I believe the present Jelco 250 is only 210 mm mounting distance.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: are you designing your own tonearm? - Da He Hua 11:56:34 02/14/17 (58)
- RE: are you designing your own tonearm? - PAR 14:40:15 02/14/17 (0)
- RE: It wants a Stevenson alignment - user510 14:32:45 02/14/17 (56)
- RE: It wants a Stevenson alignment - Da He Hua 14:52:35 02/14/17 (55)
- RE: It wants a Stevenson alignment - flood2 17:42:00 02/14/17 (53)
- RE: it is a Stevenson if... - user510 19:46:51 02/14/17 (52)
- RE: it is a Stevenson if... - flood2 23:09:57 02/14/17 (0)
- RE: it is a Stevenson if... - flood2 23:08:03 02/14/17 (49)
- RE: it is a Stevenson if... - John Elison 06:28:15 02/15/17 (44)
- RE: it is a Stevenson if... - flood2 14:45:49 02/15/17 (43)
- Technics SL-1200 Alignment - John Elison 07:08:38 02/16/17 (39)
- RE: Technics SL-1200 Alignment - flood2 01:41:07 02/17/17 (38)
- RE: Technics SL-1200 Alignment - John Elison 02:48:15 02/17/17 (37)
- RE: Technics SL-1200 Alignment - flood2 23:04:22 02/17/17 (36)
- RE: Technics SL-1200 Alignment - John Elison 11:37:56 02/19/17 (35)
- RE: Technics SL-1200 Alignment - flood2 15:05:36 02/19/17 (12)
- RE: Technics SL-1200 Alignment - John Elison 18:16:17 02/19/17 (11)
- SME3009 Xinner ~=70mm!? - flood2 19:46:32 02/20/17 (10)
- RE: SME3009 Xinner ~=70mm!? - John Elison 11:21:16 02/21/17 (9)
- RE: SME3009 Xinner ~=70mm!? - flood2 17:06:14 02/22/17 (4)
- RE: SME3009 Xinner ~=70mm!? - John Elison 08:10:01 02/23/17 (3)
- RE: SME3009 Xinner ~=70mm!? - flood2 16:55:39 02/23/17 (2)
- RE: SME3009 Xinner ~=70mm!? - John Elison 21:30:29 02/23/17 (1)
- RE: SME3009 Xinner ~=70mm!? - flood2 02:20:20 02/24/17 (0)
- RE: SME3009 Xinner ~=70mm!? - flood2 16:08:03 02/22/17 (3)
- RE: SME3009 Xinner ~=70mm!? - John Elison 12:45:00 02/23/17 (2)
- We are in complete agreement! :) - flood2 14:30:44 02/23/17 (1)
- RE: We are in complete agreement! :) - John Elison 21:10:19 02/23/17 (0)
- RE: Technics SL-1200 Alignment - frankwm 11:53:55 02/19/17 (21)
- RE: Technics SL-1200 Alignment - John Elison 22:20:40 02/19/17 (19)
- RE: Technics SL-1200 Alignment - frankwm 00:23:11 02/20/17 (18)
- RE: Technics SL-1200 Alignment - John Elison 05:28:47 02/20/17 (17)
- RE: Technics SL-1200 Alignment - frankwm 05:41:45 02/20/17 (16)
- RE: Technics SL-1200 Alignment - John Elison 12:38:08 02/20/17 (15)
- RE: Technics SL-1200 Alignment - flood2 20:01:27 02/21/17 (14)
- RE: Technics SL-1200 Alignment - John Elison 07:31:02 02/22/17 (10)
- Stevenson's Socket... - frankwm 09:16:34 02/22/17 (9)
- Your right! - John Elison 00:29:47 02/24/17 (8)
- RE: Your right! - frankwm 02:27:29 02/24/17 (1)
- RE: Your right! - John Elison 12:41:44 02/24/17 (0)
- RE: Your right! - flood2 02:11:14 02/24/17 (5)
- RE: Your right! - John Elison 05:12:00 02/24/17 (4)
- RE: Your right! - flood2 01:41:02 02/25/17 (3)
- RE: Your right! - John Elison 05:45:32 02/25/17 (2)
- RE: Your right! - flood2 23:43:20 02/26/17 (1)
- RE: Your right! - John Elison 03:30:25 02/27/17 (0)
- RE: Technics SL-1200 Alignment - John Elison 05:55:20 02/22/17 (2)
- RE: Technics SL-1200 Alignment - flood2 15:08:48 02/22/17 (1)
- RE: Technics SL-1200 Alignment - John Elison 23:29:50 02/22/17 (0)
- RE: Technics SL-1200 Alignment - flood2 13:59:41 02/19/17 (0)
- RE: it is a Stevenson if... - John Elison 16:11:46 02/15/17 (2)
- RE: it is a Stevenson if... - Garven 10:45:49 02/16/17 (1)
- RE: it is a Stevenson if... - John Elison 14:02:18 02/16/17 (0)
- RE: it is a Stevenson if... - user510 00:38:14 02/15/17 (3)
- RE: it is a Stevenson if... - John Elison 02:00:50 02/16/17 (0)
- RE: it is a Stevenson if... - flood2 01:44:48 02/15/17 (1)
- RE: it is a Stevenson if... - user510 08:44:27 02/15/17 (0)
- RE: it is a Stevenson if... - John Elison 19:55:27 02/14/17 (0)
- RE: It wants a Stevenson alignment - user510 14:59:01 02/14/17 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
