Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: RE: don't tell me that! :-( posted by NuWave on February 13, 2017 at 08:02:21:
If you have any dull solder joints, you need to reheat them and make them shiny. All your solder joints should be nice and shiny. If you have to use your solder sucker to remove solder in order to re-solder them, that's fine, too. You don't want to give up before all solder joints look good.
It's easiest and best to make a good solder joint on the first try rather than the 5th try, so maybe you should practice on an old circuit board until you become proficient.
Best regards,
John Elison
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: don't tell me that! :-( - John Elison 08:39:45 02/13/17 (7)
- RE: no........... :-( - NuWave 10:05:53 02/13/17 (6)
- RE: no........... :-( - John Elison 10:44:09 02/13/17 (1)
- RE: i just realized........ - NuWave 13:05:16 02/13/17 (0)
- RE: no........... :-( - Crazy Dave 10:10:33 02/13/17 (3)
- RE: phew.....!!! - NuWave 10:28:55 02/13/17 (2)
- RE: phew.....!!! - Crazy Dave 15:45:42 02/15/17 (1)
- RE: phew.....!!! Lotsa circuitry - bare 08:51:56 02/16/17 (0)