Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: Finally! Automatic Speed Control... posted by John Elison on January 12, 2017 at 21:03:21:
John, I went and bought an Eagle and RR as soon as I came to the very belated realization that they would work on my Lenco motor. The new stuff is still in its shipping containers, but I did read the instructions on installing the sensor, where Phoenix recommends not more than a 1/8" clearance between the magnet and the sensor itself. Did you find that to be a very critical parameter when you installed yours on the SOTA? Thanks.
Edits: 01/14/17
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Installing the sensor - Lew 09:08:48 01/14/17 (5)
- RE: Installing the sensor - John Elison 11:20:24 01/14/17 (0)
- RE: Installing the sensor - Mel 09:55:57 01/14/17 (3)
- Thanks... - Lew 11:28:26 01/15/17 (2)
- RE: Thanks... - Mel 12:02:43 01/15/17 (1)
- Binary - Lew 16:12:06 01/15/17 (0)