Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: 33.3 + .003= 33.303 posted by TomWh on January 13, 2017 at 06:46:29:
I'm not sure why that question would arise, but its my impression that cutting lathes are direct-drive and exceedingly accurate. They are probably quartz locked direct-drive like my Technics SL-1200 turntable. I measured its average rotational speed to be accurate to 0.0008% at 33.333-rpm. This equates to an accuracy of 0.0003-rpm, which is one-tenth the error of my Sota Millennia turntable with its new motor.Best regards,
John Elison
Edits: 01/13/17
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: 33.3 + .003= 33.303 - John Elison 08:28:14 01/13/17 (5)
- RE: 33.3 + .003= 33.303 - TomWh 09:28:39 01/13/17 (4)
- RE: 33.3 + .003= 33.303 - John Elison 12:24:08 01/13/17 (3)
- RE: 33.3 + .003= 33.303 - bill_stevenson@bellsouth.net 12:23:55 01/17/17 (2)
- Thanks, Bill.... - John Elison 16:11:46 01/17/17 (1)
- RE: Thanks, Bill.... - bill_stevenson@bellsouth.net 07:09:05 01/18/17 (0)