Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: ROK bearing work? posted by twystd on January 10, 2017 at 22:11:24:
when he was just experimenting with bearing surfaces (before Applied Fidelity) He simply took his bearings to a machine shop (I think it was just his borther in law's) and had what he called a micro-polish done to it. Basically he gave the bearings thrust plate a mirror polish. If you don't have a machine shop you might be able to do this with increasingly finer sand paper and eventually finishing with metal polish. I'm just thinking out loud, I've never tried it. That plus using the ceremic ball bearing made a nice improvement. It was not quite as good as his ceramic thrust plate, BUT definitely good and worth the endeavor.
Hope this helps.
Nate
You can't cheat an honest man, never give a sucker an even break or smarten up a chump -- W.C. Fields
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- I know that early on - texanater 07:04:06 01/11/17 (1)
- RE: I know that early on - Tre' 12:15:14 01/13/17 (0)