RE: Can't tell from the picture

Posted by wayne lab (A) on January 10, 2017 at 05:29:46

In Reply to: Can't tell from the picture posted by texanater on January 10, 2017 at 05:17:51:

Can I ask if you have an idea which generation of the bearing this is please? I read on the old applied fidelity link on this forum that generation 2 bearings have a sealed oil well ( which I'm presuming doesn't require the oil to be replaced ) , thanks in advance.

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - Applied Fidelity Bearing Identification and advice. - wayne lab 04:16:10 01/10/17 (16)

RE: Applied Fidelity Bearing Identification and advice. - jkaschyk 10:44:51 01/10/17 (10)

P.S. - jkaschyk 10:52:46 01/10/17 (9)

RE: P.S. - wayne lab 04:15:13 01/11/17 (6)

RE: P.S. - wayne lab 04:16:43 01/11/17 (5)

RE: P.S. - jkaschyk 06:28:50 01/11/17 (4)

RE: P.S. - wayne lab 01:16:47 01/14/17 (1)

RE: P.S. - jkaschyk 07:25:03 01/14/17 (0)

RE: P.S. - wayne lab 10:59:56 01/11/17 (1)

RE: P.S. - jkaschyk 11:43:13 01/11/17 (0)

RE: P.S. - wayne lab 01:48:45 01/11/17 (1)

I do not think spinning it will cause any problems - Penguin 21:01:16 01/12/17 (0)

RE: Applied Fidelity Bearing Identification and advice. - louie3 06:28:27 01/10/17 (0)

Can't tell from the picture - texanater 05:17:51 01/10/17 (3)

RE: Can't tell from the picture - Mel 07:48:32 01/10/17 (0)

RE: Can't tell from the picture - wayne lab 05:29:46 01/10/17 (1)

RE: Can't tell from the picture - texanater 05:44:13 01/10/17 (0)

Follow Ups

RE: Can't tell from the picture - wayne lab 05:29:46 01/10/17 (1)

RE: Can't tell from the picture - texanater 05:44:13 01/10/17 (0)

RE: Can't tell from the picture

Post a Message!