Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: MM vs MC is MC THAT much better? posted by MannyE on December 29, 2016 at 05:54:12:
Just one more thing to keep in mind about MC cartridges, and in particular LOMC, is that they typically have a much stiffer suspension to deal with the motion of the cantilever which carries the coils. Perhaps this isn't mentioned often enough, but the stiffer sprung MC cartridge produces more vibration that travels through the cartridge body and on into the armtube.... then into the pivot bearings. A cheaply made tonearm will not handle this added vibration well, resulting in pivot bearing chatter and the signal degradation that goes with it.
You want a tonearm that is known to work well with LOMC cartridges. Otherwise you may never get to hear the true potential of these higher end cartridges. And that is just one of the other extra things you need when going from MM to LOMC.
-Steve
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: it's not just about the cartridge - user510 11:36:44 12/29/16 (9)
- RE: it's not just about the cartridge - John Elison 13:16:56 12/29/16 (4)
- RE: it's not just about the cartridge - user510 13:18:40 12/29/16 (3)
- Compliance? - MannyE 14:39:30 12/29/16 (2)
- RE: Compliance. - user510 14:54:01 12/29/16 (0)
- RE: Compliance? - Tre' 14:52:35 12/29/16 (0)
- RE: it's not just about the cartridge - MannyE 12:10:20 12/29/16 (3)
- RE: it's not just about the cartridge - John Elison 13:32:54 12/29/16 (2)
- RE: it's not just about the cartridge - Lew 21:31:45 12/30/16 (1)
- RE: it's not just about the cartridge - John Elison 05:20:28 12/31/16 (0)