Home Vinyl Asylum

Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ.

RE: Basic Plus, Akito 2 or 3, Ekos or Ittok would seem to be obvious...




John: I own the 750D. If you search the archives here there's quite a bit of discussion as to whether the arm should be mounted at 214. Mine is and I align to Baerwald with 17.894 mm overhang. Even with that overhang I'm pushed back very far in the headshell.

The discussion in the archives centres on whether a greater pivot to spindle (say something around 216) might not be better and, after experience with the arm, I'm inclined to agree that it would.

Reducing the mounting distance to 211 with the 750 9 inchers would be very problematic with most, if not all cartridges. I doubt if you'd be able to align to any of the big 3 alignments with a 211 pivot to spindle with the 750D.



This post is made possible by the generous support of people like you and our sponsors:
  Atma-Sphere Music Systems, Inc.  


Follow Ups Full Thread
Follow Ups

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.