RE: Turntables for 12 inch tonearms

Posted by Lew (A) on September 22, 2016 at 13:19:49

In Reply to: RE: Turntables for 12 inch tonearms posted by Ugly on September 17, 2016 at 10:24:15:

I own a home-made equivalent. I bought a PTP "top plate" (meaning a 2-piece unit of 3mm thick steel cut to mount the bearing and motor) from Peter and contracted to have a slate slab cut to fit it. I then mated the two together myself and also added a huge aftermarket bearing assembly. I also took some steps to damp the stock platter. It's a lovely combination, looking and sounding. I would guess that the Reinders version is similar in sonic quality to mine.

For a bit more money, there is also the OMA/Lenco, made using slate, like mine. OMA have made other improvements as well.

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - Turntables for 12 inch tonearms - oldngrumpy 10:08:57 09/17/16 (9)

RE: Turntables for 12 inch tonearms - jperry 14:30:23 09/22/16 (0)

RE: Turntables for 12 inch tonearms - PAR 04:26:30 09/18/16 (4)

RE: Turntables for 12 inch tonearms - oldngrumpy 05:09:41 09/18/16 (3)

RE: Turntables for 12 inch tonearms - PAR 07:11:04 09/18/16 (2)

RE: Turntables for 12 inch tonearms - saki70 12:16:18 09/18/16 (1)

RE: Turntables for 12 inch tonearms - PAR 13:28:16 09/18/16 (0)

RE: Turntables for 12 inch tonearms - Ugly 10:24:15 09/17/16 (2)

RE: Turntables for 12 inch tonearms - edgilfus 07:17:35 09/24/16 (0)

RE: Turntables for 12 inch tonearms - Lew 13:19:49 09/22/16 (0)

Follow Ups

RE: Turntables for 12 inch tonearms - Lew 13:19:49 09/22/16 (0)

RE: Turntables for 12 inch tonearms

Post a Message!