Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: RE: SAS available again posted by flood2 on July 24, 2016 at 02:57:47:
> The 500 hours is not the time to failure but the time for the distortion level due to wear to exceed 3% at 15kHz
In addition to frequency, the modulation level of the groove is also important because distortion increases with modulation level. Therefore, you need to specify either groove amplitude or groove velocity in conjunction with the 15-kHz frequency. Another approach might be to simply specify the particular test record being used for the 15-kHz distortion test.
Best regards,
John Elison
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: SAS available again - John Elison 06:45:40 07/24/16 (6)
- RE: SAS available again - flood2 21:30:36 07/24/16 (5)
- RE: SAS available again - John Elison 21:54:03 07/24/16 (4)
- RE: SAS available again - flood2 22:16:16 07/24/16 (3)
- RE: SAS available again - John Elison 03:52:16 07/25/16 (2)
- I just checked my CBS STR-100 disc and it... - flood2 03:00:18 07/27/16 (0)
- RE: SAS available again - flood2 00:45:06 07/27/16 (0)